Heated pedestal mounted with Eye/Face Wash.stainless steel

Application: In areas where electricity is available, heat-traced Heated pedestal mounted with Eye/Face Wash provide excellent protection against freezing. Units are heated by self-limiting heat tracing cable wrapped around internal pipe. Thermostat regulates heating. Units are insulated and jacketed for protection against weather. Since units are intended for use in cold weather conditions, consideration should be given to supplying unit with tempered water in accordance with ANSI Z358.1-2004. See “Tempering Units” section for more information.

Spray Head Assembly: Two spray heads. Each head has a dust cover.

Eye/Face Wash Valve: 1/2〞IPS brass three-way self-draining stay-open ball valve. Valve has 1/2” NPT female drain port to permit water to drain from spray heads after use.

Heating Cable: Self-regulating heat tracing cable with external braid guards. Heating is controlled by automaticallly that shuts heat off when water temperature inside unit reaches 60℃

Electrical System: Unit is fully wired at the factory. All of components must be anti-exploded.
Pipe and Fittings: 304 stainless steel

Supply: 1 1/4” NPT female middle inlet.

Quality Assurance: Unit is fully assembled and factory tested prior to shipment.


Attention:Select pedestal eye wash with Heating for moderately warm or lukewarm