Heater Safety Station with Eye/Face Wash.

Application: In areas where electricity is available, heating safety stations is intended for use in cold weather conditions. units provides moderately warm or lukewarm eye/face water and excellent protection against freezing. consideration should be given to supplying unit with tempered water in accordance with ANSI Z358.1-2009. See “Tempering Units” section for more information.

Product characteristics:

• Adopt central heating method to enhance 15℃ of eye wash water temperature effectively
• Be equipped with temperature controller to control the temperature of water
• Setting up electrical heating working indicator
• Be applicable for areas where the temperature is below 5℃
• Small anti-freeze power of heater：100W。
• Large power of heater heats up water：10KW
• Voltage：380 VAC/3PH/50HZ
• Electric current：15 A
• Explosion proof grade of junction box：EX D IIB T4
• Be equipped with shower system and eye wash. It is installed on the ground of work-site directly.
• There is an auto-empty device in Eyewash system
• Main material：SS304。
• Once activate the Eyewash and Shower switch, it won’t be shut off unless man-made factors
• Shower time：＞ 15 MIN
• The requirements of water pressure：0.2—0.3 MPa。
• Inlet size：1-1/4″，FNPT
• Outlet size：1-1/4″，FNPT
• Flow of shower：＞75.7 L/MIN
• Flow of Eye Wash：＞1.5 L/MIN
• Flow of Eye/Face Wash：＞11.4 L/MIN
• Eye wash system installed manual operated pressure regulating device.
• Be equipped with LED-type nameplate
• Be equipped with yellow-black safety warning belt