|
home-eyewash and emergency shower-safetystations-801022
P/N:801022
Freeze-Resistant Safety Station with Eye/Face Wash and shower, with stainless steel.
Application: Freeze-resistant combination eye wash and shower safety station. Units are designed to drain water in safety station automatically after use, so that no standing water remains in unit and possibility of freeze-up is eliminated. Since units are intended for use in cold weather conditions, consideration should be given to supplying unit with tempered water in accordance with ANSI Z358.1-2009. See ¡°Tempering Units¡±section for more information.
Product characteristics:
Adopted advanced anti-freeze temperature detector to prevent the Eyewash and forepart supply pipe from icing.
Anti-freeze device activated in a small flow when the water temperature reaches 5¡æ
Anti-freeze device will shut off automatically when the temperature is higher than 7¡æ
Anti-freeze device activated in a large flow when the water temperature reaches 2¡æ.
There is an auto-empty device in Eyewash system
Inlet is on the shower rail; anti-freeze device is installed in eyewash system. According to the way of water, there is no dead corner in the Eyewash. Also, it makes sure the water quality.
Be equipped with shower system and eye wash. It is installed on the ground of work-site directly.
Be applicable for areas where the temperature is below 0¡æ
Main material£ºSS304
Once activate the Eyewash and Shower switch, it won¡¯t be shut off unless man-made factors
Shower time£º£¾ 15 MIN
The requirements of water pressure £º0.2¡ª0.3 MPa
Inlet size£º1-1/4¡å£¬FNPT
Outlet size£º1-1/4¡å£¬FNPT
Flow of shower£º£¾75.7 L/MIN
Flow of Eye Wash£º£¾1.5 L/MIN
Flow of Eye/Face Wash£º£¾11.4 L/MIN
Eye wash system installed manual operated pressure regulating device.
Be equipped with LED-type nameplate
Be equipped with yellow-black safety warning belt
|
enlarge photo |
Resource:
- Parts Drawing
- Size Drawing
- Install instruction book
- Video
|
